|
Standard
equipment replacements |
|
|
Part No. |
Sterling |
Part No. |
Sterling |
Part No. |
Sterling |
|
Punches and
dies (see tooling price list) |
|
|
£ |
|
£ |
|
£ |
|
Punch ram
pressure plate |
|
|
2093 |
£50.00 |
2093 |
£50.00 |
2093 |
£50.00 |
|
Punch retaining
ring |
|
|
2557 |
37.00 |
2557 |
37.00 |
2557 |
37.00 |
|
Punch adaptor -
for |
9001 series
punch |
 |
9035 |
15.00 |
9035 |
15.00 |
9035 |
15.00 |
|
|
|
9004 series
punch |
9036 |
15.00 |
9036 |
15.00 |
9036 |
15.00 |
|
'C' spanner |
|
L220/2005 |
17.00 |
L220/2005 |
17.00 |
L220/2005 |
17.00 |
|
Swing away
stripper assembly complete |
1209 |
100.00 |
1090 |
114.00 |
1090 |
114.00 |
|
Universal die
bolster |
|
83050 |
95.00 |
4221 |
147.00 |
4221 |
147.00 |
|
Punch table with
front extension |
|
|
3918/9 |
150.00 |
4224/7 |
158.00 |
4223/7 |
158.00 |
|
1 Meter ruled
length stop |
|
|
Option |
- |
1024 |
264.00 |
1024 |
264.00 |
|
Blades for
cropping angle |
Arm blade |
 |
3903 |
64.00 |
3545 |
68.00 |
3549 |
74.00 |
|
|
|
Arm blade |
- |
- |
3546 |
33.00 |
3550 |
36.00 |
|
|
|
Body blade |
3904 |
2 at 49.00 |
3543 |
74.00 |
3547 |
79.00 |
|
|
|
Body blade |
|
- |
- |
3544 |
35.00 |
3548 |
39.00 |
|
|
|
|
|
|
|
|
|
|
|
|
Machine |
COMPACT |
|
|
Part No. |
40 |
Part No. |
45 |
Part No. |
60 |
|
|
|
|
|
|
|
|
|
|
|
|
Continued… |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
Blades for
shearing flat bar |
Arm blade |
3902 |
74.00 |
3409 |
68.00 |
3409 |
68.00 |
|
|
|
Body blade |
3902 |
74.00 |
3309 |
64.00 |
3309 |
64.00 |
|
|
|
|
 
|
|
|
|
|
|
|
|
Blades for
cropping round & square |
Arm blade |
|
84191 |
78.00 |
3443 |
88.00 |
3428 |
121.00 |
|
|
bar |
Body blade |
|
84190 |
78.00 |
3442 |
88.00 |
3427 |
121.00 |
|
|
|
|
|
|
|
|
|
|
|
|
Rectangular
notch punch and dies |
Notch Punch |
|
- |
- |
3452 |
107.00 |
3310 |
127.00 |
|
|
|
Die - short |
|
- |
- |
3536 |
20.00 |
3536 |
20.00 |
|
|
|
Dies - long ( 2
) |
|
- |
- |
3535 |
at 20.00 |
3537 |
at 24.00 |
|
Service toolkit |
|
|
0803 |
69.00 |
0815 |
69.00 |
0816 |
69.00 |
|
Operators
instruction and parts manual |
|
L215/8006 |
13.00 |
L215/8044 |
13.00 |
L215/8045 |
13.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional
equipment |
|
 |
|
|
|
|
|
|
|
Punch station |
|
|
|
|
|
|
|
|
Minimum deform
stripper assembly |
|
- |
N/A |
89106 |
317.00 |
89106 |
317.00 |
|
|
|
|
   
|
|
|
|
|
|
|
|
Quick change
punch holder - up to 38 mm capacity |
|
|
|
1350 |
284.00 |
1350 |
284.00 |
1350 |
284.00 |
|
|
|
|
|
|
|
|
|
|
|
|
Corner notch
attachment - 152 x 3 mm max. capacity |
|
- |
N/A |
89043 |
1,273.00 |
89043 |
1,273.00 |
|
|
|
|
|
|
|
|
|
|
|
|
Die bolster for
punching webs of Channel/Beam section |
83135 |
186.00 |
9303 |
252.00 |
9303 |
252.00 |
|
|
|
|
|
|
|
|
|
|
|
|
Large hole/slot
attachment: - |
38 up to 57 mm |
|
1222 |
371.00 |
3571 |
239.00 |
3571 |
239.00 |
|
|
|
38 up to 110 mm |
|
- |
N/A |
9487 |
531.00 |
9487 |
531.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Machine |
COMPACT |
|
|
Part No. |
40 |
Part No. |
45 |
Part No. |
60 |
|
|
|
|
|
|
|
|
|
|
|
|
Notch station |
|
|
(Punch End) |
|
|
|
|
|
|
Rectangular
Notch Unit - 35 x65 x 8 mm |
|
1220 |
419.00 |
|
Standard |
|
Standard |
|
|
|
|
|
|
|
|
|
|
|
|
90 degree vee
notch unit |
|
  |
1221 |
459.00 |
9447 |
355.00 |
9448 |
390.00 |
|
|
|
|
|
|
|
|
|
|
|
Vee notch unit
- less than 90 degrees |
190006 |
459.00 |
9449 |
371.00 |
9462 |
395.00 |
|
|
|
|
|
|
|
|
|
|
|
Flat Bar Bending
Unit (Single Vee) |
|
1223 |
365.00 |
9445 |
385.00 |
9446 |
434.00 |
|
|
|
|
|
|
|
|
|
|
|
Punching
attachment |
|
- |
Standard |
1068 |
419.00 |
1069 |
419.00 |
|
|
|
|
|
|
|
|
|
|
|
|
Section station |
|
|
|
|
|
|
|
|
|
Blades (2) for
cropping round bar only |
 |
- |
- |
190201 |
107.00 |
190401 |
151.00 |
|
Blades (2) for
cropping square bar only |
190002 |
127.00 |
190202 |
114.00 |
190402 |
162.00 |
|
Blades (2) for
cropping UPN (Channel) |
(shown here) |
190003 |
171.00 |
9653 |
166.00 |
9654 |
210.00 |
|
Blades (2) for
cropping IPN (I beam) |
190004 |
171.00 |
9667 |
166.00 |
9668 |
210.00 |
|
Blades (2) for
cropping Tee |
|
190005 |
171.00 |
9682 |
166.00 |
9683 |
210.00 |
|
Hold Down Plate
for each of above (January 1995 onwards). |
3895 |
64.00 |
160201 |
44.00 |
160401 |
44.00 |
|
|
|
|
|
|
|
|
|
|
|
|
Special
equipment |
|
|
|
|
|
|
|
|
|
1 Metre Ruled
Length Stop |
|
|
1024 |
264.00 |
|
Standard |
|
Standard |
|
2 Metre Ruled
Length Stop with end support |
|
890204 |
557.00 |
1026 |
557.00 |
1026 |
557.00 |
|
3 Mtre Ruled
Length Stop with end support |
|
890205 |
614.00 |
1020 |
614.00 |
1020 |
614.00 |
|
1 Metre Touch
and Cut Ruled Length Stop |
|
1022 |
717.00 |
1022 |
717.00 |
1022 |
717.00 |
|
2 Metre Touch
and Cut Ruled Length Stop with end support |
890206 |
1,009.00 |
1023 |
1,009.00 |
1023 |
1,009.00 |
|
3 Metre Touch
and Cut Ruled Length Stop with end support |
890207 |
1,068.00 |
1029 |
1,068.00 |
1029 |
1,068.00 |
|
Adjustable
roller material support |
|
|
1053 |
252.00 |
1053 |
252.00 |
1053 |
252.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Machine |
COMPACT |
|
|
Part No. |
40 |
Part No. |
45 |
Part No. |
60 |
|
|
|
|
|
|
|
|
|
|
|
|
Continued… |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Movable 12v
Halogen Lamp on magnetic base |
|
K410/4750 |
137.00 |
K410/4750 |
137.00 |
K410/4750 |
137.00 |
|
Set of 4
anti-vibration machine mounts (size No. 1) |
|
K410/4701 |
78.00 |
K410/4701 |
78.00 |
K410/4701 |
78.00 |
|
Electrical
impulse batch counter - 6 digit |
|
K411/259892 |
132.00 |
K411/259892 |
132.00 |
K411/259892 |
132.00 |
|
Automatic tool
lubricating system with 2 flexible nozzles on magnetic |
|
|
|
|
|
|
|
mounts -
requires its own air supply. |
|
89091 |
1,034.00 |
89091 |
1,034.00 |
89091 |
1,034.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A comprehensive
range of tooling is available for each machine, please see our tooling price
list for full details |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All prices shown
are each, carriage and V.A.T. extra (if applicable). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PLEASE NOTE: |
|
|
|
|
|
|
|
|
|
Because of the
increased shock-load produced when punching Stainless Steel, we
STRONGLY recommend:- |
|
|
|
|
|
That the
machine is mounted on anti-vibration machine mounts (see above for
details). |
|
|
|
|
|
|
That all
punches are supplied with a `shear' (sloping edge) or `chisel' point. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When ordering
tooling |
|
|
|
|
|
|
|
|
|
|
Please advise:
- |
Machine - |
Model & Serial
Number |
|
|
|
|
|
|
|
|
Tooling - |
Shape, Size,
Part Number & Quantity |
|
|
|
|
|
|
|
|
Material - |
Thickness, Type
& Tensile Strength |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If ordering
Elongated, Rectangular or Radial Slot tooling - please supply the LENGTH,
and WIDTH of the tool required. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For Tube Notch
Tooling - please advise the Outside Diameter and the wall
thickness of the tube. |
|
|
|
|
BUYERS
>>For Formal Quote on any of the listed offers or want us to find the
machine matching your specs & budget. Contact us with complete details of
your Name, Company name, Mailing Address by Email
SELLERS>>
If you are in the Market for Selling machinery or Have for Sale -Control
systems, Spare parts, Manuals, Productivity improvement solutions for the
Machinery listed here. Contact with Priced list of Inventory with
Photos at Our Email. We can
add value to machine offers in many ways
