|
| |
|
We can supply Piranha Iron workers In both
Version :
Single operator : [ Single P40][ Single P50][ Single
P70][ Single P90][ Single P120]
Dual Operator : [ Dual PII-35][ Dual PII-65][ Dual
PII-88][ Dual PII-110][ Dual PII-140]
See below for details of Iron Workers and Mail
us for Price and other details.
Here is a Glimpse of Currently active
offers- available in the Metalforming machine market
If interested in buying :
Email us ; If interested in Selling similar machine :
Email us
|
Dual-slide controls -Dual PII-35 Dual PII-65 Dual PII-88 Dual PII-110 Dual
PII-140
|
The Piranha Model PII-35 is a complete 5-station
fabrication center with dual-slide controls for the punch station and
shear/coper stations. A large, open punch station allows the use of a
virtually unlimited range of standard accessories and special tooling.
STANDARD FEATURES:
 |
Complete Punching Attachment with stripper
|
|
Electric Punch End Control including Remote Foot Switch & Limit
Switch
|
|
Manual Shear and Coper Control
|
|
Set of Round Bar Knives [2 way] (customers choice to 1-3/8")
|
|
Set of 10" Plate Shear Knives [4 way]
|
|
Set of 13" Plate Shear Knives [4 way] (instead of Round Bar Knives
and 10" Plate Shear Knives)
|
|
Set of Angle Shear Knives [8 way top] [4 way bottom]
|
|
Extra Oil Filter
|
|
Coupling Wrench & 3/8" Allen Wrench
|
|
Intergral Lifting Lug for instant portability
|
|
|
|
|
CAPACITIES & SPECIFICATIONS: MODEL PII-35 35 TON
|
|
Throat Depth
|
7"
|
Open Height
|
10"
|
|
Closed Height w/o Die Block
|
7-1/4"
|
Work Stations From Floor
|
40"
|
Hydraulics:
Pump GPM
System R/V PSI
|
4.4
3500
|
Stroke Length
|
4-1/4"
|
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
|
Optional
1/4" to 1-3/8"
1/2" to 1"
|
Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request
|
5 HP 3 Phase
|
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W)
|
35 Tons
13/16" thru 1/2"
*3-1/2" thru 1/8"
11" x 21-1/4"
|
Coper-Notcher (Tons)
(Mat.)
|
40
2-14" x 3" x 1/4"
|
Dimensions
(NET) W-L-H
|
23"x62"x63"
|
Plate Shear
|
13" Long
5/8" x 6"
1/2" x 8"
1/4" x 13"
|
|
Bending Attachment
|
35 Tons
|
Weight (NET) lbs
|
2600
|
|
Strokes Per Minute
|
28 @ 1"
|
Angle Shear (Max.)
|
3-1/2" x 3-1/2" x 5/16"
|
|
|
The Piranha Model PII-65 has an Automatic Urethane
Hold Down on the Plate and Angle Shear, dual-operator controls for the
punch station and shear/coper stations, in addition to a 24" plate
shear capacity, the largest in it's tonnage class. Both ends of the
machine can be operated independently of each other at the same time.
STANDARD FEATURES:
|
Complete Punching Attachment with stripper
|
|
10 Punch and Die sets
|
|
Front and rear 2 position joy stick controls (electric)
|
|
Front and rear Remote Electric Foot Switches
|
|
Front limit switch stroke control
|
|
Set of Round Bar Knives [2 way] (customers choice to 1-1/2")
|
|
Set of 20.625" Plate Shear Knives [4 way]
|
|
Set of 24" Plate Shear Knives
|
|
Set of Coper Knives [2 way top] [4 way bottom]
|
|
Set of Angle Shear Knives [8 way top] [4 way bottom]
|
|
Chip Buckets (coper end)
|
|
Extra Oil Filter
|
|
Coupling Wrench
|
|
Intergral Lifting Lug for instant portability
|
|
|
|
|
CAPACITIES & SPECIFICATIONS: MODEL PII-65 65 TON
|
|
Throat Depth
|
9"
|
Open Height
|
14"
|
|
Closed Height w/o Die Block
|
7-3/4"
|
Work Stations From Floor
|
41"
|
Hydraulics:
Pump GPM
System R/V PSI
|
7.5
3500
|
Stroke Length
|
7"
|
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
|
1/4" to 1-1/2"
1/2 " to 1"
|
Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request
|
10 HP 3 Phase
|
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W)
|
65 Tons
1-1/16" thru 3/4"
*5" thru 1/8"
11" x 38"
|
Coper-Notcher (Tons)
(Mat.)
|
56
2-3/4" x 4" x 1/4"
|
Dimensions
(NET) W-L-H
|
38 "x90"x72"
|
Plate Shear
|
24" Long
3/4" x 8"
5/8" x 12"
1/4" x 24"
|
|
Bending Attachment (optional)
|
18", 24", 36", or 48"
|
Weight (NET) lbs
|
4000
|
|
Strokes Per Minute
|
19 @ 1"
|
Angle Shear (Max.)
w/Special Blade
|
5" x 5" x 3/8"
4" x 4" x 1/2"
|
|
|
|
The Piranha Model PII-88 has dual-operator controls
for the punch station and shear/coper stations and an Automatic
Urethane Hold Down on the Plate and Angle Shear. Both ends of the
machine can be operated independently of each other at the same time.
A large, open punch station allows the use of a virtually unlimited
range of standard accessories and special tooling, in addition to a
24" plate shear capacity.
STANDARD FEATURES:
|
Complete Punching Attachment with stripper
|
|
10 Punch and Die sets
|
|
Front and rear 2 position joy stick controls (electric)
|
|
Front and rear Remote Electric Foot Switches
|
|
Front limit switch stroke control
|
|
Set of Round Bar Knives [2 way] (customers choice to 1-1/2")
|
|
Set of 20.625" Plate Shear Knives [4 way]
|
|
Set of Blank Knives to extend shear to 24"
|
|
Set of Coper Knives [2 way top] [4 way bottom]
|
|
Set of Angle Shear Knives [8 way top] [4 way bottom]
|
|
Chip Buckets (coper end)
|
|
Extra Oil Filter
|
|
Coupling Wrench
|
|
Intergral Lifting Lug for instant portability
|
|
|
|
|
CAPACITIES & SPECIFICATIONS: MODEL PII-88 88 TON
|
|
Throat Depth
|
9"
|
Open Height
|
14"
|
|
Closed Height w/o Die Block
|
7-3/4"
|
Work Stations From Floor
|
41"
|
Hydraulics:
Pump GPM
System R/V PSI
|
7.5
3500
|
Stroke Length
|
7"
|
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
|
1/4" to 1-1/2"
1/2 " to 1"
|
Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request
|
10 HP 3 Phase
|
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W)
|
88 Tons
1-1/16" thru 1"
*5" thru 3/16"
11" x 38"
|
Coper-Notcher (Tons)
(Mat.)
|
56
2-3/4" x 4" x 1/4"
|
Dimensions
(NET) W-L-H
|
38 "x90"x72"
|
Plate Shear
|
24" Long
3/4" x 8"
5/8" x 12"
1/4" x 24"
|
|
Bending Attachment (optional)
|
18", 24", 36", or 48"
|
Weight (NET) lbs
|
4700
|
|
Strokes Per Minute
|
19 @ 1"
|
Angle Shear (Max.)
w/Special Blade
|
5" x 5" x 3/8"
4" x 4" x 1/2"
|
|
|
The Piranha Models PII-110 and PII-140 have
dual-operator electric controls (foot pedal and joystick) for the
punch stations and shear/coper stations. Also featured are Automatic
Urethane Hold Downs on the Angle, Plate and Bar Shears. The large,
open punch stations allow the use of a virtually unlimited range of
standard accessories and special tooling.
STANDARD FEATURES:
|
Complete Punching Attachment with stripper
|
|
10 Punch and Die sets
|
|
Automatic Urethane Hold Down on the Plate, Angle, and Bar Shear
|
|
Front and rear 2 position joy stick controls (electric)
|
|
Front and rear Remote Electric Foot Switches
|
|
Front limit switch stroke control
|
|
Set of Round Bar Knives [2 way] (customers choice to 2")
|
|
Set of 14.5" Plate Shear Knives [4 way]: For PII-110
|
|
Set of 16.625" Plate Shear Knives [4 way]: For PII-140
|
|
Set of 20.5" Plate Shear Knives [4 way] instead of Round Bar Knives
and 16.625" Plate Shear
|
|
Knives: For PII-140
|
|
Extra Blank Knife to extend shear to 18" on PII-110 or 20.5" on
PII-140
|
|
Set of Coper Knives [2 way top] [4 way bottom]
|
|
Set of Angle Shear Knives [2 way top] [4 way bottom]
|
|
Chip Buckets (coper end)
|
|
Extra Oil Filter
|
|
Coupling Wrench
|
|
Intergral Lifting Lug for instant portability
|
|
|
|
|
CAPACITIES & SPECIFICATIONS: MODEL PII-110 110 TON
|
|
Throat Depth
|
20.5"
|
Open Height
|
14"
|
|
Closed Height w/o Die Block
|
7-3/4"
|
Work Stations From Floor
|
44"
|
Hydraulics:
Pump GPM
System R/V PSI
|
12.5
3700
|
Stroke Length
|
7"
|
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
|
1/2" to 2"
1/2" to 1-3/8"
|
Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request
|
15 HP 3 Phase
|
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W)
|
110 Tons
1-7/16" thru 1"
*5-1/4"
16" x 36"
|
Coper-Notcher (Tons)
(Mat.)
|
75
3-1/2" x 5" x 3/8"
|
Dimensions
(NET) W-L-H
|
38 "x112"x85"
|
Plate Shear
|
18" Long
1" x 12"
3/4" x 18"
|
|
Bending Attachment (optional)
|
18", 24", 36", or 48"
|
Weight (NET) lbs
|
10,000
|
|
Strokes Per Minute (Approx.)
|
25 @ 1"
|
Angle Shear (Max.)
|
5" x 5" x 1/2"
|
|
|
|
The Piranha Models PII-110 and PII-140 have
dual-operator electric controls (foot pedal and joystick) for the
punch stations and shear/coper stations. Also featured are Automatic
Urethane Hold Downs on the Angle, Plate and Bar Shears. The large,
open punch stations allow the use of a virtually unlimited range of
standard accessories and special tooling.
STANDARD FEATURES:
|
Complete Punching Attachment with stripper
|
|
10 Punch and Die sets
|
|
Automatic Urethane Hold Down on the Plate, Angle, and Bar Shear
|
|
Front and rear 2 position joy stick controls (electric)
|
|
Front and rear Remote Electric Foot Switches
|
|
Front limit switch stroke control
|
|
Set of Round Bar Knives [2 way] (customers choice to 2")
|
|
Set of 14.5" Plate Shear Knives [4 way]: For PII-110
|
|
Set of 16.625" Plate Shear Knives [4 way]: For PII-140
|
|
Set of 20.5" Plate Shear Knives [4 way] instead of Round Bar Knives
and 16.625" Plate Shear
|
|
Knives: For PII-140
|
|
Extra Blank Knife to extend shear to 18" on PII-110 or 20.5" on
PII-140
|
|
Set of Coper Knives [2 way top] [4 way bottom]
|
|
Set of Angle Shear Knives [2 way top] [4 way bottom]
|
|
Chip Buckets (coper end)
|
|
Extra Oil Filter
|
|
Coupling Wrench
|
|
Intergral Lifting Lug for instant portability
|
|
|
|
|
CAPACITIES & SPECIFICATIONS: MODEL PII-140 140 TON
|
|
Throat Depth
|
20.5"
|
Open Height
|
14"
|
|
Closed Height w/o Die Block
|
7-3/4"
|
Work Stations From Floor
|
44"
|
Hydraulics:
Pump GPM
System R/V PSI
|
15
3700
|
Stroke Length
|
7"
|
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
|
1/2" to 2"
1/2" to 1-3/8"
|
Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request
|
20 HP 3 Phase
|
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W)
|
140 Tons
*1-3/4" thru 1"
5-5/16"
16" x 36"
|
Coper-Notcher (Tons)
(Mat.)
|
95
4" x 6" x 3/8"
|
Dimensions
(NET) W-L-H
|
38 "x120"x85"
|
Plate Shear
|
20-1/2" Long
1" x 14"
3/4" x 18"
1/2" x 20"
|
|
Bending Attachment (optional)
|
18", 24", 36", or 48"
|
Weight (NET) lbs
|
11,930
|
|
Strokes Per Minute (Approx.)
|
24 @ 1"
|
Angle Shear (Max.)
|
6" x 6" x 5/8"
|
|
|
BUYERS
>>For Formal Quote on any of the listed offers or want us to find the
machine matching your specs & budget. Contact us with complete details of
your Name, Company name, Mailing Address by Email
SELLERS>>
If you are in the Market for Selling machinery or Have for Sale -Control
systems, Spare parts, Manuals, Productivity improvement solutions for the
Machinery listed here. Contact with Priced list of Inventory with
Photos at Our Email. We can
add value to machine offers in many ways
