|
Edwards toolings
| |
|
We can supply Edwards Iron workers from USA
compact, well designed, well built,
uncomplicated iron workers
See below for details of Iron Workers and Mail
us for Price and other details.
If interested in buying :
Email us ; If interested in Selling similar machine :
Email us
|
|
Edwards Hydraulic Ironworkers
These compact,
well designed, well built, uncomplicated iron workers offer the biggest
tonnage per dollar for your fabrication shop. They work on the same
principal with the center pulling straight down on the work. All tooling
moves vertically, with no arc of a pivot arm. Most models come standard with
a punching station, flat bar shear, angle iron shear, and sometimes a
coper-notcher. They operate so you can move from punch to plate shear to
angle shear to notcher without always changing equipment. Many different
sizes and styles of punch & die sets are available such as round, oblong
slot, square, rectangle, keyhole, etc. Many kinds of optional tooling
available (coper-notcher, press brake, pipe notcher, angle notcher, rod
shear, gaging table, back gauge, and even radius notching). Scoll down to
see. These machines are shipped ready to operate with hydraulic oil, and
blades. All you have to do is connect the electricity. Optional 220 volts,
single phase electrics available for most machines at $195 extra. 440/480
volts costs $95 extra. Most machines include electronic stroke control and
tool box of 8 punch sets. Made in
USA. |
|
Edwards 25
Ton "Jaws Jr."
(shown on right side)
Punch 1" diameter thru 5/16" thick plate.
Shear 1/4 x 4" (with optional Multishear).
Cut 2 x 2 x 1/4 angle (with optional Multishear).
Electrics: 220 volts, 1 phase, or 110 volts.
Light duty starter machine that has 2 hydraulic powered stations to fit any
2 sets of tooling. Comes with a punching assembly, but the flat bar shear
and angle shear are an optional attachment instead of being built into the
machine.
Price Ex Works USA: $ $4,555
.Made in USA. |
 |
|
50 Ton
"Jaws IV" Iron worker machine
Made in USA.
(alot lighter than 55 ton)
Has Punching station and Coper-Notcher table
7" throat, 8-1/8 open height, 1-1/8 stroke
Punches 1" diameter thru 5/8" thick plate or 1-9/16 dia thru 3/8 (oversize)
Shears 1/2 x 10" or 3/4 x 4", 1" rod
Cuts 4 x 4 x 1/4" angle or 3 x 3 x 3/8" angle.
Optional Coper-Notcher 2 x 3 x 5/16" (The only option that fits on the right
side)
Weight: 1400 pounds. (please compare to 55 ton)
Electrics: 220 Volts, 3 phase.
Optional 440V or 220V, 1 phase
click here to see optional tooling
Price Ex Works USA: $$7,195. |
 |
|
Edwards 55
Ton "Jaws IV" Ironworker
Made in USA.
(alot heavier than 50 ton)
7" throat, 8-1/8
open height, 1-1/4 stroke
Punch 1-1/16" diameter thru 5/8" thick plate or 1-3/8 dia thru 1/2
(oversize)
Shears 1/2 x 12", 3/8 x 14", 3/4 x 4", 1-1/8 round
Cuts 4 x 4 x 1/4" angle or 3 x 3 x 3/8" angle or smaller.
Coper-Notcher 2 x 4 x 5/16" (optional)
2 versatile cavities power any 2 sets of tooling including 2 punch &
dies.
Scroll down to see optional tooling below.
Weight: 2250 pounds.
Electrics: 220 Volts, 3 phase. Optional 440V or 220V, 1 phase.
The 55 ton is Edwards' most popular machine because it is heavy, low
priced, can hold any two sets of tooling and is usually in stock.
Price Ex Works USA: $7,915 includes tool box of 8 punch & die
sets.
|
 |
|
Edwards 60
Ton "Jaws IV" Iron worker
Made in USA.
(very similar to 55 ton)
7-1/2" throat, 8-1/4 open height, 1-1/4 stroke
Punch 1-1/16" diameter thru 3/4" thick plate or 1-1/2 dia thru 1/2
(oversize)
Shears 5/8 x 12", 1/2 x 14", 3/4 x 8", 1-1/8 round
Larger angle shear cuts 4 x 4 x 3/8" or 3 x 3 x 1/2" angle or smaller.
Built-in Coper-Notcher 2-1/2" x 5" x 1/4 or 2-1/2" x 4" x 3/8"
Scroll down to see optional tooling below.
Weight: 2475 pounds.
Electrics: 220 Volts, 3 phase. Optional 440V or 220V, 1 phase.
click here to see
optional tooling
Price Ex Works USA: $8875
|
 |
|
Edwards 65
Ton "Jaws V" Iron worker
Made in USA.
10" throat, 8-1/8 open height, 1-3/8 stroke
Punch 1-1/16 diameter thru 3/4 thick plate or 1-9/16 dia thru 1/2 (oversize)
Shears 3/8 x 24", 1/2 x 14", 1" x 4", 1-1/4 round
Cuts 5 x 5 x 1/4 angle or 4 x 4x 3/8 angle.
Built-in Coper-Notcher (2-1/2 x 6 x 3/8) included
Spare cavity to power extra set of tooling.
click here to see optional tooling
Weight: 3550 pounds.
Electrics: 220 Volts, 3 phase. Optional 440V or 220V, 1 phase
Price Ex Works USA: $14395
|
 |
|
Edwards 75
Ton "Jaws IV" Iron worker Made in USA.
10" throat, 8-3/4
open height, 1-5/8 stroke
Punch 1-1/16" diameter thru 7/8 thick plate or 1-1/2 dia thru 5/8 (oversize)
Shears 1/2 x 14, 3/4 x 10", 1-1/4 round bar
Cuts 5 x 5 x 3/8 angle
Coper-Notcher 2-1/2 x 5 x 1/2 (optional)
Weight: 3150 pounds.
Electrics: 220 Volts, 3 phase. Optional 440V or 220V, 1 phase
click here to see optional tooling
Price Ex Works USA: $13195
|
 |
|
Edwards 100
Ton "Jaws IV" Ironworker
Made in USA.
10" throat, 8-5/8 open height, 1-5/8 stroke
Punch 1-1/16" diameter thru 1" thick plate or 1-9/16 dia thru 3/4 (oversize)
Shear 3/4 x 14, 1" x 10", 1-1/4 round
Cut 6 x 6 x 1/2 angle
Coper-Notcher 2-1/2 x 6 x 1/2 (optional)
2 versatile cavities power any 2 sets of tooling including 2 punch &
dies.
Weight: 3700 pounds.
Electrics: 220 Volts, 3 phase. Optional 440V or 220V, 1 phase
click here to see
optional tooling
Price Ex Works USA: $16195
|
 |
|
Edwards 100
Ton "Jaws V" Deluxe Iron worker
Production Ironworker. Made in
USA.
10" throat, 8-1/2 open height, 1-1/2 stroke.
Punch 1-1/16" diameter thru 1" thick plate or 1-9/16 thru 5/8 (oversize).
Shear 1/2 x 16", 3/4 x 12, 1" x 7, 1-1/2 round.
Cut 5 x 5 x 1/2 angle.
Coper-Notcher (3 x 6 x 3/8) included.
Built in Rod Shear for round and square.
Edwards only electric foot pedal machine.
Weight: 4700 pounds.
Electrics: 220 Volts, 3 phase. Optional 440V or 220V, 1 phase
Price Ex Works USA: $20155
|
 |
|
Edwards 120
Ton "Jaws V" Heavy Duty Machine
11" throat, 9-1/8 open height, 1-1/8 stroke
Punch 1-1/2 diameter thru 1" plate
Shears 1/2" x 24", 1" x 12", or 1-1/4 square or round
Cuts 6 x 6 x 1/2 angle.
Built-in Coper-Notcher (3 x 6 x 1/2) included
Spare cavity to power extra set of tooling.
Quick cycle time of 2.5 seconds.
Weight: 5500 pounds.
Electrics: 10 HP 220 Volts, 3 phase. Optional 440V or 575V
click here to see
optional tooling
All New Design! Made in USA.
Price Ex Works USA: $22795
|
 |
|
BUYERS
>>For Formal Quote on any of the listed offers or want us to find the
machine matching your specs & budget. Contact us with complete details of
your Name, Company name, Mailing Address by Email
SELLERS>>
If you are in the Market for Selling machinery or Have for Sale -Control
systems, Spare parts, Manuals, Productivity improvement solutions for the
Machinery listed here. Contact with Priced list of Inventory with
Photos at Our Email. We can
add value to machine offers in many ways
