|
| |
|
Here is a Glimpse of Currently active
offers- available in the Metalforming machine market
If interested in buying :
Email us
If interested in Selling similar machine :
Email us
|
STANDARD HYDRAULIC SHEARS
Standard Plate Shear Model AS
|
STANDARD PLATE SHEAR - Model AS
|
|
There are few pieces of equipment in any plant that are
depended upon as much as a plate shear. From the smallest job shop to
the largest state-of-the-art manufacturing facility, a reliable, precise
shear is a key part of their success.
Our American made, guillotine style shear has proven
itself over the last thirty years to be that key in thousands of
installations all over the world. The Standard Industrial shear gives
something that most manufacturer’s shears can’t, the total satisfaction
of knowing they purchased a machine that was 100% owned, operated and
manufactured completely in the U.S.A. |
|
STANDARD PLATE SHEAR - Model AS |
The Standard plate shear gives you a massive unitized frame in a
single fabrication. This frame consists of the closed end housings,
upper cross members, the lower beam, and a table that together create
the strongest design available on the market.
The 80,000 P.S.I. steel capacity is
supplied by a single cylinder hydra-mechanical drive system. This
capacity is crucial to meet today’s requirements.
The Standard hydraulic shear system
is one of the most powerful on the market with a large capacity pump and
valving to give the operators the most shearing tons available. This
heavy duty system allows you to shear a tremendous range of steel
thicknesses in a single blade gap setting.
A set of large, heavy duty, single
acting hold-down cylinders supply all the support required to keep the
workpiece in place for the most precise cut. These cylinders
automatically clamp down on the workpiece prior to the movement of the
blade. Narrow material is easily sheared by two cylinders placed side
by side on the right side of the shear.
|
|
Standard Industrial went to great lengths to engineer
their hydraulic plate shears to be the most trouble free available on
the market today. Although powerful, the hydraulic and electric systems
are incredibly simple to keep downtime to a minimum.
All components are made from U.S. suppliers like Square
D and Vickers, and were designed from the vendors’ stock. Your machine
will come with a manual that lists the components original
manufacturer’s name and part number. This gives you the choice to buy
replacement parts that are always available from Standard or from your
local hometown vendor’s shelf.
The hydraulic system is designed for quiet, shockless
operation to eliminate the need for special foundation requirements.
The hydraulic plate shear also comes with system overload protection to
stop damage if an operator attempts to cut more than the machine’s
capacity.
Another standard feature of the Standard Hydraulic Plate
Shear is a 36” travel, PLC controlled "Go-To" backgauge with multi-level
programming. This backgauge is undoubtedly the most heavy duty unit
available on the market. It is also available with a 48" travel and/or
with a power swingaway which brings the entire backgauge up and out of
the way to shear long pieces. With a long list of other impressive
options and standard features, the Standard Industrial shear will make
you proud when you say that you “bought American. |
Guillotine SHEAR vs. Swing Beam SHEAR
|
|
Metal plate shears consist of a lower blade (or knife)
in a fixed position in the shear frame and a movable upper blade set
into the ram (or top blade carrier) of the shear.
The most crucial aspect to the success of a hydraulic
shear is its ability to properly shear to its rated capacity over the
lifetime of the machine.
Four factors are key to this success, (1) strength of
the drive system, (2) strength of the frame, (3) a competent guidance (gibbing)
system to bring the upper blade straight down for the most precise cut
and (4) a heavy duty, high tonnage hold down system.
Another important factor is how the blades are held in
position securely during the cut.
Since the lower blade is fixed in the frame, the
quality of the cut is entirely dependent upon the design of the upper
(movable) blade carrier. This design is critical to the strength of the
entire system. The two methods commonly used to hold and guide the
upper blade are the guillotine system and the swing beam system.
|
|
STANDARD PLATE SHEAR - Model AS
|
|
Metalforming Machine market's expert sales staff stand
ready to provide extensive assistance to all our customers worldwide.
We are able assist you whether you are in the Middle
East, or anywhere in the world.
Email us
[Contact for
Machine Buyers :
sales@metalformingmachinemarket.com ]
[ Contact for Sellers of Machine:
contact@metalformingmachinemarket.com ]
|
BUYERS
>>For Formal Quote on any of the listed offers or want us to find the
machine matching your specs & budget. Contact us with complete details of
your Name, Company name, Mailing Address by Email
SELLERS>>
If you are in the Market for Selling machinery or Have for Sale -Control
systems, Spare parts, Manuals, Productivity improvement solutions for the
Machinery listed here. Contact with Priced list of Inventory with
Photos at Our Email. We can
add value to machine offers in many ways
