PETITIONERS FOR SALE!!

Please Note: All photos are taken prior to refurbishment unless otherwise stated

See below for details of Petitioners for Sale

AUTO WELDING STATIONS FOR FLANGE AND PIPE WELDING

AND MOTORISED POSITIONER

● Torch lift cold wire feed for TIG ● Fully Enclosed Unit ●

Ran & Tested @ Only 1500 GBP

BODE 10/VH 500KG WELDING POSITIONER

● Variable Speed ● Manual Tilt ● Pendant Control ●

● 900mm Diameter face plate with T – Slots ●

Ran & Tested @ Only 2500 GBP

BODE 20/VH 1000kg Positioner Year 1997

● Variable speed forwards and reverse ●Manual Tilt●360 degree Tilting Table●

● Maximum Load 1000kg● Centre of Gravity 230mm●Eccentricity 150mm●

● Tilt Torque 230 kg/m couple ●Table Diameter 915mm●Rotation Speed 0.07 to 1.40 rpm●

● L2000 x W1070mm x  H1029●

Ran & Tested @ Only 3000 GBP

BODE 1000KG CONVENTIONAL POSITIONER

● Variable speed ● Power tilt ● 900mm Diameter Face Plate ●

●Pendant or Foot Control●

Ran & Tested @ Only 3800 GBP

Refurbished @ Only 5800 GBP

BODE 2 TON HEAD AND TAIL STOCK

● Tailstock pneumatically operated ● Overhead boom and torch support with X&Y slides● 2 Idlers supports for supporting the job before and after welding●

● Maximum Diameter 1600mm, this could be altered to do smaller if required●

●Maximum Length between face plates 2100mm, this can be made larger if required●

● Maximum Distance between the faceplate 200mm●

Ran & Tested @ Only 2500 GBP

BODE 20 TON HEAD & TAIL STOCK

● Can be split from the cradle type Positioner ●

● Leaving 2 conventional heavy duty head and tail stock ●

Ran & Tested @ Only 8,000 GBP

BODE 20/VH 1000KG CONVENTIONAL POSITIONER

● Variable Speed ● Manual Tilt ● Digital Speed Display ●

● 900mm Face Plate with centering rings ●

Ran & Tested @ Only 3600 GBP

Refurbished @ Only 5100 GBP

BODE 40VP 2000KG CONVENTIONAL POSITIONER

● Power Tilt, Variable Speed ● Table Diameter 1050mm ●

● Floor to centre of Table 800mm ● Overall Length 1700mm● Width 1150mm●

● Overall Height 1000mm●

Ran & Tested @ Only 4000 GBP

Refurbished @ Only 6500 GBP

BODE 500KG WELDING POSITIONER

● Manual Rotation ● Tilt Powered ● Foot Control ●

Ran & Tested @ Only 1000 GBP

BODE 5000KG CONVENTIONAL POSITIONER

● Variable Speed Power Tilt ● Pendant Control ● Adjustable Height ●

● Table Diameter 1500mm with t- slots and centering rings ● Floor table top 1300mm lowest● ●Floor to top of table 1800mm highest setting● ●Floor Foot print L2 x W1.9 x H1.3m ●

Ran & Tested @ Only 7000 GBP

Refurbished @ Only 8500 GBP

BODE VP 3000KG CONVENTIONAL POSITIONER

● Variable Speed, Power Tilt ● Table Diameter 1200mm ●Overall Height 1250mm●

● Overall Length 2100mm ● Overall Width 1350mm●Floor to top of table 1100mm●

Ran & Tested @ Only 4700 GBP

Refurbished @ Only 6000 GBP

BODE VPC/HT 200 CRADE TYPE 20,000 KG POSITIONER

● Fixed Speed up/down with variable speed●90 degrees Rotating table with t-slots●

●800mm hole thru face plate●Working weight on the table 400kg approximately●

●Limit switches fitted●Pendant Control for Start/Stop●L5m x W2.4m X H2.2m●

●Height, floor to table centre 1800mm●Distance between Head & Tail Stock 3500mm●

●Option to removed Head and Tail Stock to give stand alone unit carrying 20 ton●

Ran & Tested @ Only 14000 GBP

CO-WELD 200KG MANUAL POSITIONER

●Manual Tilt and Manual Rotation●

As Is @ Only 200 GBP

GULLCO CANTILEVER WELDING POSITIONER, MODEL GP150

● Capacity: 70kg in the vertical and 130kg in the Horizontal●

●Variable speed, Manual Tilt from and position through to 180 degrees●

●Table speed .025 to 6.5 rpm●Forwards and reverse, Foot control●

●Fitted with self centering Gripper●Main 240 Volts●

Ran & Tested @ 1500 GBP

HAGGLUNDS 500KG WELDING TURNTABLE

● Variable Speed ● Power Tilt ● Table Diameter 900mm ●

Ran & Tested @ Only 2300 GBP

Refurbished @ Only 3100 GBP

HEAD STOCK, POWERED – 2 UNITS I STOCK

●1 Head Stock diameter 1000mm, centre height 1007mm●

●1 Head stock diameter 1200mm, centre height 1300mm●

●Could be paired up to make a head and tail stock of 8 ton ●

●With the gear box gear box being removed from the smaller head stock●

Ran & Tested @ Only 2000 GBP

Refurbished – Price on Application

INSTRUMENT ENGINEERING 200KG POSITIONER, MODEL OXFORDSHIRE

●Frame Mounted with Manual Tilt●Variable speed Forwards and Reverse●

●Fitted with torch support and Pneumatic Lift●

Ran & Tested @ Only 2200 GBP

Refurbished @ Only 3000 GBP

INSTRUMENT 25KG BENCH TYPE POSITIONER

●With MIG Torch holding station● Variable Speed Forwards and Reverse●

●Fitted with Timers and Timed Welds●

Ran & Tested @ Only 1000 GBP

Refurbished @ Only 2100 GBP

JETLINE LATHE WELDER WITH EUTECTIC PTA SYSTEM FOR CIRCUMFERENCIAL PTA WELDING

●High Quality Lathe With Precision Track and Carriage system for equipment●

●Mount and Powered movement of the PTA weld head●Meta base laser tracking system with full integration to Jetline●Package electro mechanical weld overlay oscillation system●

●Arc Length Control●9500 Micro Processor base sequence control linked to Castoline Eutectic PTA package●

AS IS @ 30,000 GBP

MACOBE 500KG WELDING POSITIONER

●Variable Speed● Manual Tilt● 900mm Diameter Face Plate●Foot Control On/Off●Mains Supply 240 Volts●

Ran & Tested @ Only 1800 GBP

Refurbished @ Only 2500 GBP

MACOBE 6 TON WELDING POSITIONER

●Variable Speed●Power Tilt●Table Diameter 1520mm● Pendant Control

●5000kg @ 12” C of G●Year 1997●

Ran & Tested @ Only 8000 GBP

Refurbished @ Only 9500 GBP

MPE 250KG WELDING POSITIONER

●Variable Speed Forward and Reverse●Manual Tilt●Table Diameter 600mm●

●Foot Control On/Off●Floor to top of table 1000mm●Mains Volts 240●

Ran & Tested @ Only 1800 GBP

Refurbished @ Only 2500 GBP

NEW 100KG WELDING POSITIONER, BENCH TYPE

●Variable Forward/Reverse, ●Manual Tilt, Foot Control●1 Phase 110/220v 50/60Hz●

●Capacity Horz/Verz 100/75kg – Rated CofG 100mm●Welding Time 0-60 Seconds – Rotation Speed 0-4rpm OR 1-15rpm●Earthing 300Amp – Tilt Range 0-120 Degrees●

●Table Face Plate 320mm Diameter●Centre of table to Floor 250mm – 35mm Hole Through Table●Dimensions L410mm x W410mm x H340mm●Weight 42kg●

New @ Only 1100 GBP

NEW LATHE TYPE POSITIONAL EQUIPMENT

● Torch Actuator●Pneumatic Tailstock●V Block Torch Holder●Manual Slides●

●100kg Tilting Positioner with Idler Supports●

Various Systems available to suit requirements●

Price on Application depending on specification

NEW PT 450 POSITIONAL EQUIPMENT

●Power Tilt●1 Phase 50/60Hz 115/230 Volts●450/300 Capacity●Table Dimensions 450mm●

●Rotation Speed 0.12 – 2.5 RPM●L 630mm x W650mm x H630mm Centre of table to floor 540mm●Weight 134kg●

NEW ONLY 3,349GBP

NEW PT 450M POSITIONAL EQUIPMENT

●Manual Tilt●1 Phase 50/60Hz 115/230 Volts●450/300 Capacity●Table Dimensions 450mm●

●Rotation Speed 0.12 – 2.5 RPM●L 630mm x W650mm x H630mm Centre of table to floor 540mm●Weight 134kg●

NEW ONLY 2, 911 GBP

NEW PT-1500 POSITIONAL EQUIPMENT

Power Tilt

●1500kg Capacity● Table Dimension 800mm●0.05 – 1 RPM Rotation Speed ●Centre of table to floor 850mm. ●L1150 x W1000 x 990mm●Weight 750kg●

New Only 6.990 GBP

NEW PT – 750 POSITIONAL EQUIPMENT

●Power Tilt●1 PHASE 220-240V 50-60HZ●700/500kg Capacity●Table Dimensions 600mm●

●Rotation Speed 0.05 – 1 RPM●50.5 diameter hole through table●L920mm x W 875mm x 720mm●Weight 323kg●

New Only 4.714 GBP

PEMA 250 KG POSITIONER TURNTABLE

●Variable Speed, Power Tilt● Forward/Reverse●Pendant Control or Foot Control●

●500mm x 500mm Square Face Plate with T-Slots●Variable Height from 750mm to 1000mm●Volts 415●Dimensions L1500mm x W800mm x H750mm●

Ran & Tested @ Only 1800 GBP

Refurbished @ Only 2700 GBP

ROSS 250KG WELDING POSITIONER TURNTABLE

●Variable Speed, Manual Tilt●Table Diameter 600mm●Mains Supply 240 Volts●

Ran & Tested @ Only 1300 GBP

Refurbished @ Only 1700 GBP

All our machines are prepared for each and every customer.

“As Is” condition

Sold as per photograph

“Ran & Tested”

Machines cleaned, any necessary parts replaced

3 Months Parts and Labour Warranty

“Fully Serviced” condition

Machines dismantled, cleaned, fully serviced and any necessary parts

replaced including re-piping. 4 Months Parts and Labour Warranty

“Fully Refurbished” condition

Machines dismantled, cleaned, painted and colour coded, fully serviced and any necessary parts replaced including electric control units.  4 Months Parts and Labour Warranty

All prices are quote Net GB Sterling and exclusive of VAT

All sizes are approximate

Labour Warranty not included for Export Orders